Move the pry tool along the entire bottom and the case will loosen. The idea here is to push the pry tool into the seam at the base of the Steam Deck (pictured above). Removing the case can cause damage to the memory card if you’re not careful, so it’s best to remove it now. Before attempting anything, be sure to remove the microSD card if you have one plugged in. Once extracted, you should be left with the following:įor this I used the pry tool that came with the JSAUX Steam Deck backplate. Tip: The outer screws are a different size from the four inner screws, so be sure to place them separately. With the Steam Deck powered off, place it face down on a flat surface and remove the eight screws highlighted in the image above. Valve also recommends you put the Steam Deck into battery storage mode before attempting any kind of modifications. Safety PrecautionsĪs Ifixit notes, you’ll want to let the Steam Deck battery discharge to below 25 percent before opening it up due to the dangers of accidentally piercing a lithium-ion battery.
#Steam deck os how to
That’s why I’ll be going over how to reimage the Steam Deck after the SSD is fully installed so you can get it back up and running faster. Once the SSD is installed, it’ll work, but you won’t have an operating system, meaning the Steam Deck won’t do much. You will also need a computer with an Internet connection and some form of storage like a microSD card or a USB thumbstick and a dock. The above is directly for the SSD installation. M.2 NVMe 2230 SSD (I used the SYONCON 512GB version).As Steam Deck designer Lawrence Yang says, it will “significantly shorten the life of your Deck.” You have been warned. Do not use a larger SSD that has been cut down to size. You also need to only be using a 2230 SSD. I used a Phillips number one, but it’s worth having both the number one and the Phillips number zero just to be safe if you want to avoid wearing the thread off the screws.
It’s especially important to make sure you’ve got the right screwdriver.
#Steam deck os download
Step 13: Download the Steam Deck Image and Rufusīefore we get into anything, it’s worth taking a moment to make sure you’ve got the right tools.Step 12: Reconnect and Screw in the Back Plate.Step 9: Inset the New SSD and Screw it in.Step 8: Remove and Transfer the SSD/eMMC Shielding.Step 7: Remove the Original SSD/eMMC Drive.Step 5: Disconnect the Battery (Important).
Step 4: Remove the Screws from the Shield.
0 kommentar(er)
